I engraved Thanksgiving themed images on my cutting board, knives and forks. Awesome!!
Basic Information is loading...
Step 1
Setting 1
Process Method
Bitmap Laser Engrave
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
250
Pass
1
Import your design file to XCS, connect the machine with your computer, and then adjust the size of the image according to the size of the cutting board.
Then you can click Process and Frame to confirm the processing area.
Step 2
When the process is complete, turn off the machine. And then you can take the piece out of it.
Take a look at this, isn't it great!!
NOTE
To center the image on the cutting board, you can place the laser dot at the center of the board, and then set the starting point of processing on the Preview page.
Import your design file to XCS, connect the machine with your computer, and then adjust the size of the image according to the size of the cutting board.
Then you can click Process and Frame to confirm the processing area.
When the process is complete, turn off the machine. And then you can take the piece out of it.
Take a look at this, isn't it great!!
NOTE
To center the image on the cutting board, you can place the laser dot at the center of the board, and then set the starting point of processing on the Preview page.