Today is my friend's birthday and I am preparing a bottle of wine for him and engraving a wooden gift box.
Basic Information is loading...
Step 1
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
20
Pass
1
Setting 2
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
30
Pass
1
Import the pattern into XCS software. The design file has 4 built in canvases. Put the basswood in order, complete the focus, confirm the pattern position by walking around the border, and finally start laser cutting.
Step 2
Cutting of all materials.
Step 3
Assembling all the materials.
NOTE
Once assembled, it is best to reinforce the joints with wood glue and the red wine bottle must be within 7.5mm diameter.
Import the pattern into XCS software. The design file has 4 built in canvases. Put the basswood in order, complete the focus, confirm the pattern position by walking around the border, and finally start laser cutting.
Cutting of all materials.
Assembling all the materials.
NOTE
Once assembled, it is best to reinforce the joints with wood glue and the red wine bottle must be within 7.5mm diameter.