Champagne is for celebrations. Imagine using your custom cups to enjoy champagne with your friends and family. It'll definately add more fun to your parties~
Basic Information is loading...
Step 1
Setting 1
Process Method
Bitmap Laser Engrave
Power(%) or Cut Pressure(g)
65
Speed(mm/s)
50
Pass
1
Note:
Make sure the pattern is positioned on the center of the cup.
Make sure the cup is horizontally placed so as to avoid deviation of engraving outcome.
After engraving, soak the cup in the water for one minute and then tear the colored paper. In this way, the engraved pattern will not be damaged.
Import the drawing file to XCS first, and then disassemble the baseplate and blade cutting pad.
Remove the blade head, and then place the riser at the bottom of the machine.
Attach the colored paper to the cup, and wait for the paper to dry up. Then, place the cup at the center of the machine and measure the distance.
Select Laser cylindrical and click Roller mode before you start processing.
Step 2
Take out the engraved cup and tear the colored paper off.
Note:
Import the drawing file to XCS first, and then disassemble the baseplate and blade cutting pad.
Remove the blade head, and then place the riser at the bottom of the machine.
Attach the colored paper to the cup, and wait for the paper to dry up. Then, place the cup at the center of the machine and measure the distance.
Select Laser cylindrical and click Roller mode before you start processing.
Take out the engraved cup and tear the colored paper off.
There it is. The project is done~